G4208A User’s Guide 72
2 Working with the Instant Pilot
Working with Methods
Method File Protection
With firmware revsion B.02.05 (May 2007) several additional checks and
disabling of functions were added to ensure protected file security - online and
offline:
• If a file is protected, the user can not edit the currently loaded method content
or its filter settings.
•Edit, Filter, and Save buttons are disabled.
• Enter edit mode by pressing Enter button is disabled.
•Save As under a different name is allowed and will be stored under the new
name unprotected. Using the same name results in File Save Failed:
Permission denied error.
• Renaming a protected file is not allowed.
•Transfer of protected file is allowed, if not a protected file with the same name
already exists in the targeted destination. Then the user has to unprotect the
protected file on target first.
•Import fails, if a protected method with the same name on the Instant Pilot
already exists.
• In the files dialogs, a protected file can be copied, but not renamed or deleted.
Copy a protected file, makes an unprotected copy under a different name on
the same medium.
• To unprotect a file, the user has to enter the correct password.
To Next Page
Loading...
Need help?
General
