G4208A User’s Guide 49
1 Start-up Information
Maintenance Information
Product Number and Serial Number Change
Figure 31 Maintenance Screen - Product Number and Serial Number Change
When the main board has to be replaced, the new board does not have a serial
number. For some modules (e.g. pumps or auto samplers) the type has to be
changed (multiple usage boards). Use the information from the serial number
plate of your module.
The changes become active after the reboot of the module. This function should
be used by Agilent trained personnel only. Otherwise, the module may be no
longer accessible.
Details can be found in the manual provided with the HPLC module.
To Next Page
Loading...
Need help?
General
