G4208A User’s Guide 57
2 Working with the Instant Pilot
Using a USB Flash Drive
Using a USB Flash Drive
You can use many USB Flash Drive with USB 1.1 support that can be physically
inserted while the Instant Pilot is attached to the Agilent system.
1 Open the USB cover.
2 Insert the USB Flash Drive.
Figure 34 Inserting a USB Flash Drive
The display shows whether the USB Flash Drive is inserted and active by an
icon.
• not present - grey,
• present - blue,
• active - yellow with red dot (do not unplug!)
Since USB Flash Drives may vary from vendor to vendor or from type to type,
incompatibilities can occur. In general, USB Flash Drives from Sandisk and
Kingston should work. The USB Flash Drives must be FAT-16 formatted and
without encryption.
See Table 14 on page 152.
See also “Handling of Unsupported USB Flash Drive Formats” on page 58.
To Next Page
Loading...
Need help?
General
