G4208A User’s Guide 45
1 Start-up Information
Configuration
Configuration
1 To view/change the configuration, press More from the Welcome screen and
select Configuration from the menu.
Figure 25 Configuration of System
2 To change the system configuration, move to the line you want to change and
press Edit. After doing the changing, press OK or Done.
The Instrument Name will appear as identifier on the screens (e.g. Welcome)
or printouts/reports.
3 To start the Setup Wizard (see also “Getting Started” on page 27), press Setup
(in system).
4 To change a module specific setting, select the appropriate module view.
to change the settings
opens the Setup Wizard
leaves this screen
system or module specific
information
To Next Page
Loading...
Need help?
General
