G4208A User’s Guide 88
2 Working with the Instant Pilot
Sequence - Automating Analyses
Saving a Sequence
Sequences are stored within the Instant Pilot (internal memory) and/or on an
external USB Flash Drive. The sequence is only in the controller. Changes to a
sequence line can be when the line is not active (if sequence is running). The
Instant Pilot generates a list of all available sequences that can be loaded.
The number of sequences that can be stored depends on the number of
timetable and injector program lines included. In general, more than 100
squinches may be stored in the Instant Pilot. With differing sequence contents,
the actual amount of sequences to be stored may change significantly.
Use a USB Flash Drive to store an infinite number of sequences for future use or
exchange between LC instruments (see
“Transfer of Methods” on page 76).
Figure 64 Sequence - File menu
•Save stores the current sequence into the file it was loaded from
•Save as allows the selective storage in the Instant Pilot’s internal memory or
on the external USB Flash Drive and copy/delete/protection functions.
To Next Page
Loading...
Need help?
General
