G4208A User’s Guide 119
4 Running Multiple-Vial Analyses
Analyzing Multiple Vials Using Different Methods
10 Move to the End of sequence list and select Insert.
11 Select Method and then move to METH3 and press Load.
12 Move to the End of sequence list and select Insert.
13 Select Wait time and enter:
14 Select Done to accept entries.
15 Move to the End of Sequence list, select the Wizard and enter:
16 Select Done to accept entries.
17 Press Start and confirm the start of the sequence.
Wait 30 min
Vial Range 41 – 50
#Inj. 3
To Next Page
Loading...
