Agilent Technologies InfinityLab LC Series User Guide

G4208A User’s Guide 134
4 Running Multiple-Vial Analyses
Synchronizing Analyses with External Devices
NOTE
An Agilent variable wavelength detector or diode array detector will perform a
balance (assumed that Auto Balance is set to pre-run) when receiving a start
command from the Instant Pilot. This will only happen in the Standard and Wait
for single (multiple) start request modes. In the Send single (multiple) start
request modes, a balance before the run will NOT be performed. If regular
balancing is required, set the Auto Balance check box to Postrun.

Agilent Technologies InfinityLab LC Series Specifications

General

Brand	Agilent Technologies
Model	InfinityLab LC Series
Category	Laboratory Equipment
Language	English