G4208A User’s Guide 3
In This Guide...
This book describes how to operate the Agilent 1100/1200/1260/1290 Series
modules and systems for HPLC using the handheld control module Agilent Instant
Pilot G4208A.
The Instant Pilot provides complete local control and monitoring of a single
module or an entire Agilent 1100/1200/1260 and 1290 Series HPLC system. There
is no data evaluation in the Instant Pilot. The Instant Pilot allows you to do a variety
of HPLC tasks including automated sample preparation and injection, isocratic,
gradient and multiple method analyses and basic diagnostics and maintenance.
1Start-up Information
This chapter provides general information around the Agilent Instant Pilot.
2 Working with the Instant Pilot
This chapter describes the operation of the Instant Pilot.
3 Running an Isocratic Analysis
This chapter describes how to analyze the Agilent Technologies isocratic standard
sample using a single injection analysis.
4 Running Multiple-Vial Analyses
This chapter describes how to setup multiple vial analyses using the same method
and different methods.
5 Maintenance and Repair
This chapter describes how to perform firmware updates, troubleshooting and
replacements.
6Appendix
This chapter provides safety and other general information.
If additional details are required on a specific topic/function/parameter not
mentioned in this document, please use the Instant Pilot’s Online Information
System (i), see “The i (info) key - Online Information System” on page 23.
To Next Page
Loading...
