G4208A User’s Guide 75
2 Working with the Instant Pilot
Working with Methods
1 Press File and select the Save as.
Figure 50 Method - Save As
2 Choose the location (internal = Instant Pilot or USB = USB Flash Drive) and a
name (if not already done).
3 You may delete or copy methods from one location to the other.
4 You may protect/un- protect a method (see “Method Properties” on page 71
and “Method File Protection” on page 72).
The stored method now contains all the current LC system and module settings.
If you disconnect the Instant Pilot from one LC system and connect it to another
LC system, the Instant Pilot’s current method will get an (*) or (#) because its
settings vary from the settings of the new LC system.
To transfer methods from one LC system to another you can use the Instant Pilot
or a USB Flash Drive.
To Next Page
Loading...
Need help?
General
