Preparation
3-6 Defibrillating in AED Mode
Preparation
If the patient is:
l
unresponsive
l
not breathing
l
pulseless
Then:
1. Apply multifunction defib electrode pads to the patient, as directed on the
package. Use the anterior-apex electrode placement.
2. Connect the pads to the pads patient cable, as shown in Figure 3-3.
3. If needed, insert a Data Card (as described in “Using a Data Card
(Optional)” on 2-13).
)LJXUH&RQQHFWLQJ3DGVWRWKH3DWLHQW&DEOH
To Next Page
Loading...
