Agilent Technologies M4735A - Performing AED Defibrillation Steps

Defibrillating
M4735A Heartstream XL Defibrillator/Monitor 3-7
3
Defibrillating
Follow the voice and screen prompts as they guide you through the following
steps:
1. Turn the Energy Select knob to AED On.
In this first step of the defibrillation process, the Heartstream XL checks to
see if the pads patient cable and the pads are connected. If they are, it pro-
ceeds to step 2.
If the pads patient cable is not properly attached, you are prompted to
&RQQHFW3DGV&DEOH.
)LJXUH&RQQHFW3DGV&DEOH'LVSOD\
Connect
Pads
Cable
Shocks: 0
00:00:02