Selecting a Sensor
M4735A Heartstream XL Defibrillator/Monitor 5-5
5
The most important factor when selecting a sensor is the position of the light
emitting diodes in relation to the photodetector; when a sensor is applied, the
diodes and the photodetector must be opposite each other. Sensors are
designed for patients within a specific weight range and for specific sites. Be
sure to:
l
Select a sensor appropriate for the patient’s weight.
l
Select a sensor site with adequate perfusion.
l
Avoid application to sites with edematous tissue.
Reusable Sensors
Reusable sensors may be reused on different patients after they have been
cleaned and disinfected (see the manufacturer’s instructions supplied with the
sensor).
Disposable Sensors
Disposable sensors should be used only once and then discarded. They can be
relocated to a different application site on the patient if the first location does
not give the desired results. Disposable sensors must not be reused on differ-
ent patients.
To Next Page
Loading...
