Agilent Technologies M4735A - Page 74

Troubleshooting
4-12 Monitoring the ECG
QRS Volume l No sound
l Too low
l Too loud
l Adjust the volume.
l Check configurations.
QRS beeper inau-
dible or beeps do
not occur with
each QRS com-
plex.
l The QRS beeper is con-
figured to Off.
l The amplitude of the
QRS complex is too
small to detect.
l Check that the QRS
beeper is configured to
On.
l Adjust the volume.
l Adjust the size of the
ECG.
Situation Cause Solution