Agilent Technologies PSG Series - ΦM Stop Rate; ΦM Sweep Rate

Key Reference
Symbols
Chapter 596
ΦM Stop Rate
Supported
PSG-A Series
This softkey enables you to change the ending frequency of the internally generated
modulation source for swept-sine phase modulation.
Preset 400.0 Hz
Range 1 Hz
−
1 MHz (minimum increment allowed is 1 Hz)
Location Page 238
Remarks This softkey is coupled to the
ΦM Tone 2 Rate softkey in the
Φ
M
Dual-Sine menu. Any value set for
Φ
M Stop Rate is reflected in the
ΦM
Tone 2 Rate
softkey.
ΦM Sweep Rate
Supported
PSG-A Series
This softkey enables you to set the sweep rate for swept-sine phase modulation.
Preset 400.0 Hz
Range 1 Hz
−
100.0 kHz
Location Page 238
Remarks N/A