Key Reference
L
Chapter 5 175
LF Out Start Freq
Supported PSG-A Series
This softkey enables you to change the starting frequency for swept-sine low frequency
output. This key is coupled to the
LF Out Freq softkey in the initial LF Out menu and the
LF Out Tone 1 Freq softkey in the LF Out dual-sine menu. Any value set for LF
Out Start Freq
is reflected in the LF Out Freq and LF Out Tone 1 Freq softkeys. Conversely, if
you change the value for either the
LF Out Freq softkey or the LF Out Tone 1 Freq softkey,
the value for
LF Out Start Freq is changed to match.
Preset 400.0 Hz
Range 1.0 Hz
−
1.0 MHz (minimum increment is 1.0 Hz)
Location Page 240
Remarks This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
LF Out Stop Freq
Supported PSG-A Series
This softkey enables you to change the ending frequency for swept-sine low frequency
output.
This key is coupled to the
LF Out Tone 2 Freq softkey in the LF Out Dual-Sine menu. Any
value set for
LF Out Stop Freq is reflected in the LF Out Tone 2 Freq softkey.
Preset 400.0 Hz
Range 1.0 Hz
−
1.0 MHz (minimum increment is 1.0 Hz)
Location Page 240
Remarks This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
To Next Page
Loading...
Need help?
General
