Key Reference
I
Chapter 5170
Inverse Video Off On
Supported All
This softkey toggles the operating state of the inverse video. When inverse mode is on,
light text on a dark background is displayed. The normal display mode for the signal
generator, inverse off, is dark text on a light background.
Preset N/A
Range Off or On
Location Page 247
Remarks The inverse video state is not affected by a preset or by a power cycle.
IP Address
Supported All
This softkey enables you to enter the IP address for your TCP/IP network connection. No
IP address is entered at the factory.
Preset N/A
Range N/A
Location Page 247
Remarks The IP address setting is not affected by a preset or by a power cycle.
To Next Page
Loading...
Need help?
General
