Key Reference
I
Chapter 5164
Instrument Adjustments
Supported All
Use this softkey to access a menu of front panel adjustments for the signal generator.
This menu enables you to adjust the reference oscillator, and set the value of the step
keys and the front panel knob.
Preset N/A
Range N/A
Location Page 247
Remarks None
Instrument Info/Help Mode
Supported All
Press this softkey to display a menu of softkeys for the following functions:
• display diagnostic information about your signal generator
• display all available options and the associated hardware
• display the self test control menu
• toggle the modulation status display on and off
• toggle the help mode between single and continuous
• display information about the installed boards
Preset N/A
Range N/A
Location Page 247
Remarks None
To Next Page
Loading...
