Agilent Technologies PSG Series - Preset List; Preset Normal User; Pulse

Key Reference
P
Chapter 5194
Preset List
Supported All
This softkey enables you to delete the current sweep list and replace it with a new list
consisting of one point at a default frequency, amplitude, and dwell time.
Preset N/A
Range N/A
Location Page 233, Page 246
Remarks Be certain that you want to delete the current sweep list; you cannot
recover the information once you press
Preset List.
Preset Normal User
Supported All
This softkey toggles the preset state between the factory-defined and the user-defined
states. If you choose Normal, preset conditions will be a factory-defined state. If you
choose User, the preset conditions will be a defined and saved by the user with
Save User Preset.
Preset N/A
Choices Normal or User
Location Page 247
Remarks None
Pulse
Supported PSG-A Series
Use this hardkey to access a menu of choices that enables you to configure the pulse
modulation.
Preset N/A
Range N/A
Location Page 242
Remarks None