Key Reference
M
Chapter 5 185
Mod Status Info Off On
Supported PSG-A Series
This softkey toggles the operating state of the modulation status display. When the
modulation status is set to on, information about the status of all of the modulations
available is shown at any time that you have accessed one of the modulation menus.
Refer to Figure 5-6. When the modulation status is set to off, the information about the
status of all the modulations is not displayed.
Figure 5-6 Modulation Status Information
Preset On
Choices On or Off
Location Page 250
Remarks None
To Next Page
Loading...
Need help?
General
