Key Reference
R
Chapter 5 199
Recall Ref Osc Setting
Supported All
Use this softkey to recall the last saved reference oscillator coarse and fine adjustment
setting.
Preset N/A
Range N/A
Location Page 248
Remarks This adjustment is intended for use by service personnel. Refer to the
calibration guide for more information.
Recall Reg
Supported All
Use this softkey to recall an instrument state from a saved register. Recalling a register
also selects that register number for all keys which specify a register number in this
menu. You can also use the front panel knob and the up and down arrow keys to scroll
through all saved registers for the selected sequence.
Preset N/A
Range N/A
Location Page 243
Remarks None
Ref Osc Coarse
Supported All
This softkey is provided for adjusting the internal reference oscillator. Refer to the
calibration guide for more information.
Preset N/A
Range N/A
Location Page 248
Remarks This adjustment is intended for use by service personnel.
To Next Page
Loading...
Need help?
General
