Key Reference
A
Chapter 5112
AM Start Rate
Supported PSG-A Series
This softkey enables you to change the starting frequency of the internally generated
modulation source for swept-sine amplitude modulation.
Preset 400.0 Hz
Range 1.0 Hz
−
1.0 MHz (minimum increment allowed is 1.0 Hz)
Location Page 231
Remarks This softkey is coupled to the
AM Rate softkey in the initial AM menu
and the
AM Tone 1 Rate softkey in the AM Dual-Sine menu. Any value
set for AM Start Rate is reflected in the
AM Rate and AM Tone 1 Rate
softkeys.
AM Stop Rate
Supported PSG-A Series
This softkey enables you to change the ending frequency of the internally generated
modulation source for swept-sine amplitude modulation.
Preset 400.0 Hz
Range 1.0 Hz
−
1.0 MHz (minimum increment allowed is 0.1 Hz)
Location Page 231
Remarks This softkey is coupled to the
AM Tone 2 Rate softkey in the AM
Dual-Sine menu. Any value set for AM Stop Rate is reflected in the
AM
Tone 2 Rate
softkey.
AM Sweep Rate
Supported PSG-A Series
This softkey enables you to set the sweep rate for swept-sine amplitude modulation.
Preset 400.0 Hz
Range 0.1 Hz−100.0 kHz
Location Page 231
Remarks N/A