Key Reference
E
Chapter 5142
Ext2
Supported PSG-A Series
This softkey enables you to select an externally applied signal for the modulation
waveform once you have connected the signal source to the EXT 2 INPUT connector.
Preset N/A
Range N/A
Location Page 230, Page 235, Page 237
Remarks The externally applied, ac-coupled input signal is tested for a voltage
level and a display annunciator will report a high or low condition if
that voltage is >
±
3% of 1 V
p
.
External Ref Bandwidth
Supported PSG-A Series with Option UNJ
This softkey enables you to adjust the bandwidth of the external reference oscillator.
Preset N/A
Choices 25.0 Hz 55.0 Hz 125.0 Hz 300.0 Hz
650.0 Hz
Location Page 248
Remarks None.
To Next Page
Loading...
