Key Reference
R
Chapter 5 203
RS-232 Baud Rate
Supported All
Use this softkey to access a menu of choices that enables you to set the baud rate in bits
per second for the rear panel RS-232 connector, labeled AUXILIARY INTERFACE.
RS-232 Echo Off On
Supported All
This softkey toggles the operating state of the RS-232 serial port, AUXILIARY
INTERFACE connector, echo function. When this function is set to on, every character
sent to the signal generator is immediately sent back. No editing capability is available.
Preset N/A
Range Off or On
Location Page 248
Remarks The echo state is not affected by a preset or by a power cycle.
RS-232 Setup
Supported All
Use this softkey to access a menu of choices that enables you to configure the rear panel
RS-232, AUXILIARY INTERFACE, connector.
Preset N/A
Range N/A
Location Page 248
Remarks None
Preset N/A
Choices 57600 38400 19200 9600
4800 2400 1200 300
Location Page 247
Remarks Once set, the baud rate is not affected by a preset or by a power cycle.
To Next Page
Loading...
Need help?
General
