Key Reference
A
Chapter 5 119
Atten Hold Off On
Supported All with Option 1E1
This softkey toggles the operating state of the attenuator hold function. Turn attenuator
hold on to freeze the attenuator at its current setting. Use this function at any time you
want to guarantee that there will be no power discontinuity normally associated with
the attenuator switching during power adjustments.
Preset Off
Choices Off or On
Location Page 232
Remarks There will be no attenuator switching during power adjustments. The
maximum power adjustment range will vary. However, you will have at
least +4 dB and at least
−
13 dB range.
Auto
Supported All
This softkey sets the state of the automatic leveling control bandwidth capability.
Preset N/A
Range N/A
Location Page 232
Remarks None
To Next Page
Loading...
Need help?
General
