Key Reference
S
Chapter 5210
Select Reg
Supported All
Use this softkey to select a specific register to be highlighted in the list of saved states.
Preset N/A
Range N/A
Location Page 244
Remarks None
Select Reg:
Supported All
This softkey enables you to select a register for all softkeys that specify a register in this
menu. For example, if you want to select register 5, press
Select Reg:. The currently
selected register is displayed in the active entry area. Change the number to 5 and press
the
Select Reg terminator softkey. Register 5 is now displayed in all softkeys which
specify a register in this menu.
You can also use this softkey to select a register and save the current instrument state to
that register. For example, if you want to select and save to register 6, press
Select Reg:.
The currently selected register is displayed in the active entry area. Change the number
to 6 and press the
Save Reg terminator softkey. Register 6 is now displayed in all
softkeys which specify a register in this menu and the current instrument state has been
saved to register 6.
Preset 0
Range 00
−
99
Location Page 244
Remarks None
To Next Page
Loading...
Need help?
General
