Agilent Technologies PSG Series User Manual

Fundamental Operation
Using Data Storage Functions
Chapter 248
To Delete a Specific Register within a Sequence
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Select Seq and enter the sequence number containing the register you want to delete.
4. Press
Select Reg and enter the register number you want to delete.
Notice that the
Delete Seq[n] Reg[nn] is now loaded with the sequence and register you
want to delete.
5. Press
Delete Seq[n] Reg[nn].
This deletes the chosen register.
To Delete All Registers within a Sequence
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Select Seq and enter the sequence number containing the registers you want to
delete.
4. Press
Delete all Regs in Seq[n].
This deletes all registers in the selected sequence.
To Delete All Sequences
CAUTION This will delete the entire contents of all registers and all sequences contained
in the instrument state register.
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Delete All Sequences.
This deletes all of the sequences saved in the instrument state register.

Agilent Technologies PSG Series Specifications

General

Brand	Agilent Technologies
Model	PSG Series
Category	Portable Generator
Language	English