Provision Quality of Service (QoS) 8-129
Provision the QoS profile definitions 8-130
Parameters for provisioning a QoS profile 8-131
View QoS profile information 8-134
View the details of a LAN/WAN port QoS parameters 8-135
Edit QoS mode 8-136
Provision QoS Flow Identification Table 8-138
Parameters for provisioning Flow Identification Tables 8-141
Edit the QoS egress details 8-145
Ingress rate control 8-146
Provision cross connections without protection 8-147
Creating cross connections without protection 8-148
Deleting cross connections 8-150
Parameters for provisioning cross connections without protection 8-151
Provision cross connections with SNC protection 8-152
Add SNC/N protection to an unprotected cross-connection 8-153
Remove protection from an SNC/N protected cross-connection 8-155
Delete an existing cross-connection 8-157
Parameters for provisioning a cross-connection with SNC protection 8-159
View or Edit the LTU information 8-160
View the LTU information 8-161
Edit the LTU Information 8-162
Parameters for viewing or editing LTU information 8-163
View or Edit the SHDSL connection information 8-164
View the SHDSL connections 8-165
Update the SHDSL connection list 8-166
Details of the SHDSL Connection List 8-167
Parameters for viewing or editing the SHDSL connections list 8-168
View or Edit the NTU information 8-169
Update the NTU information 8-170
View the NTU information 8-171
Edit the NTU information 8-172
View or Edit NTU’s General Configuration 8-173
Remote SHDSL Power Supply (RPS) 8-175
VC 12 termination point information 8-176
Traffic provisioning
Overview
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-3
To Next Page
Loading...
