Alcatel-Lucent 7210 SAS M - Page 195

Virtual Leased Line Services
7210 SAS M Services Guide Page 195
T-PE2
The following displays an example for the configuration on TPE2.
*A:ALA-49>config>service>epipe# info
----------------------------------------------
endpoint "x" create
exit
endpoint "y" create
revert-time 100
exit
spoke-sdp 4:400 endpoint "y" create
precedence primary
exit
spoke-sdp 5:500 endpoint "y" create
precedence 1
exit
spoke-sdp 6:600 endpoint "y" create
precedence 1
exit
no shutdown
----------------------------------------------
*A:ALA-49>config>service>epipe#
S-PE1
The following displays an example for the configuration on S-PE1.
*A:ALA-50>config>service>epipe# info
----------------------------------------------
...
spoke-sdp 1:100 create
exit
spoke-sdp 4:400 create
exit
no shutdown
----------------------------------------------
*A:ALA-49>config>service>epipe#