Alcatel-Lucent 7210 SAS M - Configuration Examples; PBB ELAN and ELINE

Configuration Examples
Page 454 7210 SAS M Services Guide
Configuration Examples
Use the CLI syntax displayed to configure PBB.
PBB ELAN and ELINE
Use the following CLI syntax to bring up PBB B-VPLS - common to both ELAN and ELINE
services:
CLI Syntax: config>service# vpls 200 customer 1 b-vpls create
description “This is a B-VPLS.”
sap 3/1/3:33 create
description “B-VPLS SAP”
Use the following CLI syntax to bring up PBB ELAN:
CLI Syntax: config>service# vpls 2000 customer 6 i-vpls create
description “This is an I-VPLS.”
sap 4/1/3:20 create
description “I-VPLS SAP”
backbone-vpls 200
Use the following CLI syntax to bring up PBB ELINE:
CLI Syntax: config>service# epipe 1000 customer 10 create pbb-epipe
description “This is an Epipe.”
sap 4/1/3:20 create
description “Epipe SAP”
pbb-tunnel 200 backbone-dest-mac 00-01-10-1E-C6-67 isid 752