Alcatel-Lucent 7210 SAS M - Disabling a VPRN Service

Configuring a VPRN Service with CLI
Page 578 7210 SAS M Services Guide
Disabling a VPRN Service
A VPRN service can be shut down without deleting any service parameters.
CLI Syntax: config>service#
vprn service-id [customer customer-id]
shutdown
Example
: config>service# vprn 1
config>service>vprn# shutdown
config>service>vprn# exit
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
shutdown
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
autonomous-system 10000
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
qos 100
exit
egress
qos 1010
filter ip 6
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
spoke-sdp 2 create
exit
exit
...
----------------------------------------------
*A:ALA-1>config>service#