Alcatel-Lucent 7210 SAS M Service Guide

Configuring an IES Service with CLI
Page 510 7210-SAS M Services Guide
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure IES
services and provides the CLI commands.
1. Associate an IES service with a customer ID.
2. Associate customer ID with the service.
3. Assign an IP address.
4. Create an interface.
5. Define SAP parameters on the interface
→ Select node(s) and port(s).
→ Optional — select filter policies (configured in the config>filter context).
6. Enable service.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English