VPRN Services Command Reference
Page 586 7210 SAS M Services Guide
BGP Configuration Commands
config
—service
— vprn service-id [customer customer-id]
—no vprn service-id
— [no] bgp
—[no] advertise-inactive
— [no] aggregator-id-zero
— always-compare-med {zero | infinity}
—no always-compare-med
— [no] as-path-ignore
— auth-keychain name
— authentication-key [authentication-key | hash-key] [hash | hash2]
—no authentication-key
— [no] connect-retry seconds
— [no] damping
— description description-string
—no description
— [no] disable-4byte-asn
— disable-capability-negotiation
—no disable-capability-negotiation
— disable-communities [standard] [extended]
—no disable-communities
—
[no] disable-fast-external-failover
— [no] enable-peer-tracking
— export policy-name [policy-name...(upto 5 max)]
—no export
— family [ipv4]
—no family
— hold-time seconds [strict]
—no hold-time
— import policy-name [policy-name...(up to 5 max)]
—no import
— keepalive seconds
—no keepalive
— local-preference ip-address
—no local-preference
— local-as
— local-as as-number [private]
—no local-as
— local-preference local-preference
—no local-preference
— loop-detect {drop-peer | discard-route | ignore-loop| off}
—no loop-detect
— med-out {number | igp-cost}
—no med-out
— min-as-origination seconds
—no min-as-origination
— min-route-advertisement seconds
—no min-route-advertisement
— multihop ttl-value
—no multihop
—
— next-hop-self
To Next Page
Loading...
