Alcatel-Lucent 7210 SAS M - DSCP Marking; Table 18: DSCP;FC Marking; Virtual Private Routed Network Service; Internet Enhanced Service

VPRN Features
Page 560 7210-SAS M Services Guide
DSCP Marking
DSCP values, dot1p values and forwarding class for all applications is assigned by the system. On
ingress, the system uses meters with default values to rate-limit all applications to system defined
values. A separate queue and policer is used, one each for all access ports and for all network
ports.
Table 18: DSCP/FC Marking
Protocol IPv4 IPv6
DSCP
Marking
Dot1P
Marking
Default
FC
ARP 7 NC
BGP 48 7 NC
BFD
Telnet 34 4 H2
TFTP
FTP
SSH (SCP) 34 4 H2
SNMP (get, set, etc.)
SNMP trap/log
syslog
OAM ping
ICMP ping 0 0 NC
Traceroute 7 0 NC
TACPLUS
DNS
SNTP/NTP
RADIUS