Alcatel-Lucent 7210 SAS M - Deleting Customers

Services
7210 SAS M Services Guide Page 85
Deleting Customers
The no form of the customer command removes a customer ID and all associated information. All
service references to the customer must be shut down and deleted before a customer account can
be deleted.
CLI Syntax: config>service# no customer customer-id
Example
: config>service# epipe 5 customer 27 shutdown
config>service# epipe 9 customer 27 shutdown
config>service# no epipe 5
config>service# no epipe 9
config>service# no customer 27