Alcatel-Lucent 7210 SAS M - PBB Show Commands

PBB Show Commands
7210-SAS M Services Guide Page 465
PBB Show Commands
PBB
eth-cfm
Syntax eth-cfm
Context show
Description This command displays 802.1ag CFM information.
association
Syntax association [ma-index] [detail]
Context show>eth-cfm
Description Shows association information.
Parameters ma-index — Specifies the MA index value.
Values 1 — 4294967295
detail — Displays all association detail.
Output
*A:alcag1-R6# show eth-cfm association
======================================================================
CFM Association Table
======================================================================
Md-index Ma-index Name CCM-interval Bridge-id
----------------------------------------------------------------------
1 1 ivpls 1 5000
======================================================================
*A:alcag1-R6#
cfm-stack-table
Syntax cfm-stack-table
cfm-stack-table port [port-id> [vlan qtag[.qtag]] [level 0..7] [direction up | down]
cfm-stack-table sdp [sdp-id[:vc-id]>] [level 0..7]] [direction up | down]
cfm-stack-table virtual [service-id] [level 0..7]
Context show>eth-cfm
Description Summarizes all MEPs/MIPs.
Parameters port-id — Displays information about the specified port.
Values port-id slot/mda/port[.channel]
lag-id lag-id