Alcatel-Lucent 7210 SAS M - Modifying a Cpipe Service

Virtual Leased Line Services
7210 SAS M Services Guide Page 197
Modifying a Cpipe Service
The following example displays the Cpipe service configuration.
*A:ces-A>config>service>cpipe# info
----------------------------------------------
cpipe 1 customer 1 vc-type satop-t1 create
sap 1/2/1.1 create
ingress
qos 12
exit
exit
spoke-sdp 12:1 create
exit
no shutdown
exit
----------------------------------------------
*A:ces-A>config>service>cpipe