Virtual Leased Line Services
7210 SAS M Services Guide Page 129
Table 9: Default and Minimum Payload Size for CESoPSN without CAS
Structured T1/E1 CES with CAS
Structured circuit emulation with CAS is supported for T1 and E1 circuits.
Structured CES with CAS service is configured by choosing cesopsn-cas as the vc-type when
creating a Cpipe service. The DS1 or E1 service on the port associated with the Cpipe SAP should
be configured to support CAS (via the signal-mode {cas} command) before configuring the Cpipe
service to support DS1 or E1 with CAS. Refer to the 7210 SAS Interface Configuration Guide for
information on configuring signal mode.
To Next Page
Loading...
Need help?
General
