Alcatel-Lucent 7210 SAS M - VPLS Show Commands

VPLS Show Commands
7210 SAS M Services Guide Page 861
VPLS Show Commands
egress-label
Syntax egress-label egress-label1 [egress-label2]
Context show>service
Description This command displays service information using the range of egress labels.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are
displayed.
If both egress-label1 and egress-label2 parameters are specified, the services using the range of labels
X where egress-label1 <= X <= egress-label2 are displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters egress-label1 — The starting egress label value for which to display services using the label range. If
only egress-label1 is specified, services only using egress-label1 are displayed.
Values 0, 2049 — 131071
egress-label2 — The ending egress label value for which to display services using the label range.
Default The egress-label1 value.
Values 2049 — 131071
fdb-info
Syntax fdb-info
Context show>service
Description Displays global FDB usage information.
Output Show FDB-Info Command Output — The following table describes show FDB-Info command
output.
Label Description
Service ID
The value that identifies a service.
Mac Move
Indicates the administrative state of the MAC movement feature asso-
ciated with the service.