Alcatel-Lucent 7210 SAS M Service Guide

Virtual Private Routed Network Services
7210 SAS M Services Guide Page 657
as-override
Syntax [no] as-override
Context config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description This command replaces all instances of the peer's AS number with the local AS number in a BGP
route's AS_PATH.
This command breaks BGP's loop detection mechanism. It should be used carefully.
Default as-override is not enabled by default.
authentication-key
Syntax authentication-key [authentication-key | hash-key] [hash | hash2]
no authentication-key
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description This command configures the BGP authentication key.
Authentication is performed between neighboring routers before setting up the BGP session by veri-
fying the password. Authentication is performed using the MD-5 message-based digest. The
authentication key can be any combination of letters or numbers from 1 to 16.
The no form of the command removes the authentication password from the configuration and
effectively disables authentication.
Default Authentication is disabled and the authentication password is empty.
Parameters authentication-key — The authentication key. The key can be any combination of ASCII characters
up to 255 characters in length (unencrypted). If spaces are used in the string, enclose the entire
string in quotation marks (“ ”).
hash-key — The hash key. The key can be any combination of ASCII characters up to 342 characters
in length (encrypted). If spaces are used in the string, enclose the entire string in quotation marks
(“ ”).
This is useful when a user must configure the parameter, but, for security purposes, the actual
unencrypted key value is not provided.
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash parameter specified.
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
not used, the less encrypted hash form is assumed.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English