Alcatel-Lucent 7210 SAS M - Page 229

Virtual Leased Line Services
7210 SAS M Services Guide Page 229
Service Filter and QoS Policy Commands
egress
Syntax egress
Context config>service>cpipe>spoke-sdp
config>service>epipe>spoke-sdp
config>service>epipe>sap
Description This command enables the context to configure egress SAP parameters.
force-vlan-vc-forwarding
Syntax [no] force-vlan-vc-forwarding
Context config>service>epipe>spoke-sdp
config>service>vpls>spoke-sdp
Description This command forces vc-vlan-type forwarding in the data path for spoke which have either vc-type.
This comand is not allowed on vlan-vc-type SDPs.
The no version of this command sets default behavior.
Default Per default this feature is disabled
ingress
Syntax ingress
Context config>service>epipe>sap
config>service>cpipe>sap
config>service>cpipe>spoke-sdp
config>service>epipe>sap>statistics
Description This command enables the context to configure ingress SAP Quality of Service (QoS) policies.
If no sap-ingress QoS policy is defined, the system default sap-ingress QoS policy is used for ingress
processing.
aggregate-meter-rate
Syntax aggregate-meter-rate rate-in-kbps [burst burst-in-kbits]
no aggregate-meter-rate
Context config>service>vpls>sap>ingress
config>service>epipe>sap>ingress