Alcatel-Lucent 7210 SAS M - Page 859

VLL Debug Commands
7210 SAS M Services Guide Page 859
prLength : 0x04
srcMac : 8c:c7:01:07:00:03
destMac : 00:00:00:00:00:00
srcIp : 200.1.1.2
destIp : 200.1.1.1
"
4 2008/11/17 18:13:24.35 UTC MINOR: DEBUG #2001 Base Service 1000 SAP 1/7/1 "Service
1000 SAP 1/7/1:
TX: ARP_RESPONSE (0x0002)
hwType : 0x0001
prType : 0x0800
hwLength : 0x06
prLength : 0x04
srcMac : 00:03:0a:0a:0a:0a
destMac : 8c:c7:01:07:00:03
srcIp : 200.1.1.1
destIp : 200.1.1.2
"
sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id
Description This command enables debugging for a particular SDP.
Parameters sdp-id — Specifies the SDP ID.