Alcatel-Lucent 7210 SAS M - Page 934

Show, Clear, Debug Commands
Page 934 7210 SAS M Services Guide
port-db
Syntax port-db [sap sap-id] [group grp-address]
port-db
sdp sdp-id:vc-id [group grp-address]
Context clear>service>id>igmp-snooping
Description This command clears the information on the IGMP snooping port database for the VPLS service.
Parameters sap sap-id — Clears IGMP snooping statistics matching the specified SAP ID and optional
encapsulation value. See Common CLI Command Descriptions on page 939 for command
syntax.
sdp-id — Clears only IGMP snooping entries associated with the specified mesh SDP or spoke SDP.
For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is optional.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to clear information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
group grp-address — Clears IGMP snooping statistics matching the specified group address.
querier
Syntax querier
Context clear>service>id>igmp-snooping
Description This command clears the information on the IGMP snooping queriers for the VPLS service.