Alcatel-Lucent 7210 SAS M - Page 937

VPLS Debug Commands
7210 SAS M Services Guide Page 937
fsm-timers
Syntax [no] fsm-timers
Context debug>service>id>stp
Description This command enables STP debugging for FSM timer changes.
port-role
Syntax [no] port-role
Context debug>service>id>stp
Description This command enables STP debugging for changes in port roles.
port-state
Syntax [no] port-state
Context debug>service>id>stp
Description This command enables STP debugging for port states.
sap
Syntax [no] sap sap-id
Context debug>service>id>stp
Description This command enables STP debugging for a specific SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 939 for command syntax.
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>stp
Description This command enables STP debugging for a specific SDP.