Alcatel-Lucent 7210 SAS Series - Page 216

Network Queue QoS Policy Commands
Page 212 7210 SAS D, E, K OS Quality of Service Guide
cbs
Syntax [no] cbs size-in-kbytes
Context config>qos>network-queue>queue
Description
Platforms Supported: 7210 SAS-K.
This command specifies the CBS value (Minimum depth of the queue in kilo bytes).
The no form of the command sets it to the default value.
Default 32Kbits
Parameters size-in-kbytes — Specifies the minimum depth of the queue in kilo bytes.
Values [0..10240]
mbs
Syntax [no] mbs size-in-kbytes
Context config>qos>network-queue>queue
Description
Platforms Supported: 7210 SAS-K.
This command specifies the MBS value (Maximum depth of the queue in kilo bytes).
The no form of the command sets it to the default value.
Default 512Kbits
Parameters size-in-kbytes — Specifies the minimum depth of the queue in kilo bytes.
Values [0..12800]
priority
Syntax [no] priority level
Context config>qos>network-queue>queue
Description
Platforms Supported: 7210 SAS-K.