Page 368 7210 SAS D, E, K OS Quality of Service Guide
Remark
True — Remarking is enabled for all the
Dot1q-tagged packets that egress the ports on which the sap-
egress QoS policy is applied and remarking is enabled.
False — Remarking is disabled for the policy.
Remark Pol Id
Displays the policy id of the remarking policy.
Scope
Exclusive — Implies that this policy can be applied only to a
single access egress port.
Template — Implies that this policy can be applied to
multiple access ports on the router.
Template — Implies that this policy can be applied to multiple
access ports on the router.
Description
A text string that helps identify the policy’s context in the con-
figuration file
Queue Rates and Rules
QueueId
Displays the Queue identifier associated with the sap-egress
QoS policy.
CIR
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the
system prioritizes the queue over other queues competing for the
same bandwidth.
CIR Adpt Rule
min — The operational CIR for the queue will be equal to or
greater than the administrative rate specified using the rate com-
mand.
max — The operational CIR for the queue will be equal to or
less than the administrative rate specified using the rate com-
mand.
closest — The operational CIR for the queue will be the rate
closest to the rate specified using the rate command without
exceeding the operational PIR.
PIR
Specifies the administrative Peak Information Rate (PIR)
parameters for the queue. The PIR defines the maximum rate
that the queue can transmit packets through the access port.
Label Description (Continued)
To Next Page
Loading...
Need help?
General
