Alcatel-Lucent 7705 - Page 253

VLL Services
7705 SAR OS Services Guide Page 253
ETH-CFM Service Commands
eth-cfm
Syntax eth-cfm
Context config>service>epipe>sap
config>service>epipe>spoke-sdp
Description This command enables the context to configure ETH-CFM parameters.
mep
Syntax mep mep-id domain md-index association ma-index [direction {up | down}]
no mep mep-id domain md-index association ma-index
Context config>service>epipe>sap>eth-cfm
config>service>epipe>spoke-sdp>eth-cfm
Description This command provisions an 802.1ag or a Y.1731 maintenance association endpoint (MEP).
In Release 3.0, the 7705 SAR supports Up and Down MEPs on Ethernet SAPs (802.1ag and Y.1731),
and Down MEPs on Ethernet spoke SDPs (802.1ag only).
The no form of the command reverts to the default values.
Parameters mep-id — specifies the maintenance association endpoint identifier
Values 1 to 8191
md-index — specifies the maintenance domain (MD) index value
Values 1 to 4294967295
ma-index — specifies the MA index value
Values 1 to 4294967295
up | down — specifies the direction in which the maintenance association (MEP) faces on the bridge
port (up sends Continuity Check messages (CCMs) towards the fabric, down sends CCMs towards
the egress port or line)