VLL Services Command Reference
Page 258 7705 SAR OS Services Guide
low-priority-defect
Syntax low-priority-defect {allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
Context config>service>epipe>sap>eth-cfm>mep
config>service>epipe>spoke-sdp>eth-cfm>mep
Description This command specifies the lowest-priority defect that is allowed to generate a fault alarm.
Default remErrXcon
Parameters allDef — DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM
macRemErrXcon — DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM
remErrXcon — only DefRemoteCCM, DefErrorCCM, and DefXconCCM
errXcon — only DefErrorCCM and DefXconCCM
xcon — only DefXconCCM
noXcon — no defects DefXcon or lower are to be reported
To Next Page
Loading...
