VLL Services Command Reference
Page 264 7705 SAR OS Services Guide
precedence
Syntax precedence [precedence-value | primary]
no precedence
Context config>service>apipe>spoke-sdp
config>service>cpipe>spoke-sdp
config>service>epipe>spoke-sdp
config>service>ipipe>spoke-sdp
Description This command specifies the precedence of the spoke SDP when there are multiple spoke SDPs
associated with one service endpoint. One SDP binding can be assigned to be the primary SDP
binding, leaving three bindings for secondary bindings, or, if no primary spoke SDP is defined, up to
four secondary spoke SDPs can be configured. When an SDP binding goes down, the next highest
precedence SDP binding will begin to forward traffic.
The no form of the command returns the precedence value to the default.
Default 4
Parameters precedence-value — specifies the spoke SDP precedence
Values 1 to 4 (where 1 is the highest precedence)
primary — makes the specified spoke SDP the primary spoke SDP (primary is indicated on the CLI
display as the value 0)
vc-label
Syntax vc-label egress-vc-label
no vc-label [egress-vc-label]
Context config>service>apipe>spoke-sdp>egress
config>service>cpipe>spoke-sdp>egress
config>service>epipe>spoke-sdp>egress
config>service>ipipe>spoke-sdp>egress
Description This command configures the egress VC label.
Parameters egress-vc-label — indicates a specific connection
Values 16 to 1048575
To Next Page
Loading...
