VLL Services Command Reference
Page 276 7705 SAR OS Services Guide
Service Destination Points (SDPs)
Description Displays generic information about the SDP
SDP Id Identifies the SDP
Type Identifies the service SDP binding type (for example, spoke)
VC Type Displays the VC type for the SDP (for example, CESoPSN)
VC Tag The explicit dot1Q value used when encapsulating to the SDP
far end
Admin Path MTU Specifies the desired largest service frame size (in octets) that
can be transmitted through this SDP to the far-end router,
without requiring the packet to be fragmented
Oper Path MTU Specifies the actual largest service frame size (in octets) that
can be transmitted through this SDP to the far-end router,
without requiring the packet to be fragmented
Far End Displays the IP address of the remote end of the MPLS or GRE
tunnel defined by this SDP
Delivery Specifies the type of delivery used by the SDP (MPLS or
GRE)
Admin State Specifies the administrative state of this SDP
Oper State Specifies the operational state of this SDP
Acct. Pol The accounting policy ID assigned to the SAP
Collect Stats Specifies whether collect stats is enabled
Ingress Label Displays the label used by the far-end device to send packets to
this device in this service by this SDP
Egress Label Displays the label used by this device to send packets to the
far-end device in this service by this SDP
Admin ControlWord Specifies the administrative state of the control word:
Preferred (control word enabled) or Not Preferred (control
word disabled)
Oper ControlWord Specifies the operational state of the control word: True
(control word enabled) or False (control word disabled)
Last Status Change Specifies the time of the most recent operating status change to
this spoke SDP
Table 34: Show Service-ID All Command Output Fields (Continued)
Label Description
To Next Page
Loading...
