VLL Services
7705 SAR OS Services Guide Page 277
Signaling Specifies the signaling protocol used to obtain the ingress and
egress labels used in frames transmitted and received on this
SDP
Last Mgmt Change Specifies the time of the most recent management-initiated
change to this spoke SDP
Flags Displays the conditions that affect the operating status of this
spoke SDP. Display output includes PathMTUtooSmall,
SdpOperDown, NoIngVCLabel, NoEgrVCLabel, and so on
Mac Move Indicates the administrative state of the MAC movement
feature associated with the service
Peer Pw Bits Displays the setting of the pseudowire peer bits. Display output
includes pwNotforwarding, psnIngressFault, psnEgressFault,
IacIngressFault, lacEgressFault
Peer Fault Ip N/A
Peer Vccv CV Bits Displays the setting of the pseudowire peer VCCV control
verification bits (lspPing)
Peer Vccv CC Bits Displays the setting of the pseudowire peer VCCV control
channel bits (pwe3ControlWord and/or mplsRouterAlertLabel)
Keepalive Information
Admin State Specifies the administrative state of the keepalive protocol
Oper State Specifies the operational state of the keepalive protocol
Hello Time Specifies how often the SDP Echo Request messages are
transmitted on this SDP
Hello Msg Len Specifies the length of the SDP Echo Request messages
transmitted on this SDP
Max Drop Count Specifies the maximum number of consecutive SDP Echo
Request messages that can be unacknowledged before the
keepalive protocol reports a fault
Hold Down Time Specifies the amount of time to wait before the keepalive
operating status is eligible to enter the alive state
Statistics
I. Fwd. Pkts. Specifies the number of forwarded ingress packets
I. Dro. Pkts. Specifies the number of dropped ingress packets
Table 34: Show Service-ID All Command Output Fields (Continued)
Label Description
To Next Page
Loading...
